Filter
Top Products
[12] Memory Switch (continued)
13-46
[18] Key click sound
When this feature is Low or High, the machine activates a buzzer sound when the touch
sensitive screen is touched or any key is pressed. This confirms the machine recognition
of the selection.
[19] Job memory recall
This feature allows the machine to initialize using selections stored in job memory No.15
when the power is turned on or the [AUTO RESET] key is pressed.
NOTE:
This function works only when job memory No.15 is registered.
[20] Sheet insertion
This setting allows selection of tray 1, tray 2, tray 3, tray 4, LCT, or Bypass as the source of
the inserted sheets.
[21] 5.5"x8.5" orig. type
Selects orientation of 5.5"x8.5" size originals.
Options: Landscape or portrait.
[22] Rotation
When turned on the feature allows the machine to automatically rotate an 8.5"x11" original
image to match the manually selected paper size. For example, if an original is placed in
the RADF or on the platen glass in the 8.5"x11"R position and the 8.5"x11" paper size is
selected, the machine will rotate the image to fit the 8.5"x11" paper.
[23] 1 SHOT indication time
Determines the duration of messages that are displayed, i.e., 50 SHEETS MAXIMUM IN
STAPLE MODE. Options: 1/ 2/ 3/ 4 or 5 seconds.
[24] AUTO START
This feature allows the machine to start the copying operation as soon as the document
feeder/platen cover is closed down over the platen original.
[25] No-printing timer
Sets the timer to allow the printing job to start after operating the copying job.
[26] Power save key
Selects the power saver mode to be activated by pressing [POWER SAVER ON/OFF] key.
[27] Bypass tray size
Selects the paper size detectable on the Multi-sheet bypass tray.
[28] Letter Head
This setting allows selection of tray 1, tray 2, tray 3, tray 4, or none as the source of the
letterhead paper so that the top of the image data of the reverse side always comes under
the letterhead in duplex copying. When using this function, load the letterhead paper with
the letterhead side FACE DOWN.
[29] APS priority
Sets the priority tray in APS mode.
[30] Rotation copy of enlarge
When turned on the feature allows the machine to automatically rotate and enlarge an long-
edge-feeded original image to match the manually selected short-edge-feeded paper size.