Filter
Top Products
[12] Memory Switch (continued)
13-45
[4] Non Image Area Erase
Establishes how the machine determines the image area of the copy.
Options: ON and APS/AMS only. ON option limits the copy image area to that of the
original. The APS/AMS only option limits the copy image area to that of the copy paper
sizes and the magnification automatically selected by the machine.
[5] RADF frame erasure
Sets the amount of frame erase when using the RADF.
Options: None, 1 mm/ 2 mm/ 3 mm/ 4 mm/ 5 mm.
[6] Auto tray switch
During a copy job when ATS is on and multiple paper trays are loaded with the same size
paper, the machine will automatically switch to another tray when the initial tray runs out of
paper. Refer to memory switches 9 through 14 to activate this feature for each tray.
[7] Platen APS
This feature allows the machine to automatically detect the size of the original placed on
the glass and select the same size copy paper. Refer to 9 through 14 to activate this
feature for each tray.
[8] RADF APS
This feature allows the machine to detect the size of the original fed through the RADF.
Refer to switches 9 through 14 to activate this feature for each tray.
[9] ATS/APS (Bypass)
This setting activates ATS and APS (platen and RADF) for Multi-sheet bypass.
[10] ATS/APS SW (Tray 1)
This setting activates ATS and APS (platen and RADF) for Tray 1.
[11] ATS/APS SW (Tray 2)
This setting activates ATS and APS (platen and RADF) for Tray 2.
[12] ATS/APS SW (Tray 3)
This setting activates ATS and APS (platen and RADF) for Tray 3.
[13] ATS/APS SW (Tray 4)
This setting activates ATS and APS (platen and RADF) for Tray 4.
[14] ATS/APS SW (LCT)
This setting activates ATS and APS (platen and RADF) for LCT.
[15] Platen AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is placed on the platen glass.
[16] RADF AMS
This feature allows the machine to automatically select the proper magnification ratio
when copy paper size is selected manually and an original is fed from the RADF.
[17] Staple mode reset
When copying in the sort/staple mode, this setting allows the machine to automatically
reset to non-staple mode when the job in progress is completed.
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address