Filter
Top Products
4-6
Interrupt Copying
Use the Interrupt mode to interrupt copying in progress to perform a simple job.
When interrupt copying is completed, the settings for the initial job restore automatically
and the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory while printing in Reserve mode
The Interrupt mode cannot be selected with the following copier conditions:
• The Basic Screen is not displayed.
• The Call for Service message displays or a paper misfeed occurs.
• The Auto Low Power or Auto Shut-off will not function during the Interrupt mode.
1. Press [INTERRUPT] on the control panel.
The [INTERRUPT] LED turns on and the SETTING indicator on the Basic Screen
changes to INTERRUPT.
The timing to enter the Interrupt mode varies according to the job in progress
on the machine when [INTERRUPT] is pressed.
See the following page.
In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning
the reserve job originals clears the settings selected for the reserve job.
For details of Reserve mode, see p. 3-28 to p. 3-29.