Filter
Top Products
[2] Copier Initial (continued)
13-7
[1] Copy Mode
Set Copy mode to occur after power on or after Auto Reset occurs.
❒ Setting options: RADF; 1-1; 1-2; 2-2; 2-1
❒ Default setting: RADF on, 1-1
Procedure
1 Touch 2. Copier Initial on the System/Copier Setting Menu Screen to display the Copier
Initial Setting Screen, then touch 1. COPY MODE to display the Copy Mode Initial Setting
Screen.
2 Touch the setting you want for the initial condition of the copier.
If 1-2, 2-2 or 2-1 mode is selected, RADF will also be selected automatically. In this case,
the RADF must be in a closed position when power is turned ON, or when Auto Reset is
functioning. Otherwise, the message “Please close RADF” will be displayed.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
System/Copier Setting Menu Screen
Copier Initial Setting Screen
Copy Mode Initial Setting Screen
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address