Filter
Top Products
[19] Finisher Adjustment (continued)
13-56
Check the entered value and previous value displayed in the upper-left side area.
NOTE:
• If entered value does not fall within the limit indicated on each screen, the
largest value within the limit (according to the +/- sign) will be displayed.
• If wrong number is entered, continue entering the correct number.
5 Check the copy result of the adjustment.
Touch COPY on each adjustment screen to display the Basic Screen. Touch the size key of
the paper size specified in step 3, then press [START] on the control panel.
Check the output copy, then press [∗] and [#] on the control panel to return to the adjustment
screen.
NOTE:
Repeat the steps 4 to 5 till the desired adjustment result is obtained.
6 Touch SET to complete the setting.
Touch RETURN to restore the Finisher Adjustment Menu Screen.
7 Touch RETURN to restore the System/Copier Setting Menu Screen.
8 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.