Filter
Top Products
[2] Copier Initial (continued)
13-9
[3] Magnification
Set the magnification ratio you initially want to display after the user turns the power on or
after Auto Reset restores the Initial settings.
NOTICE:
This setting should not conflict with the Initial setting for Paper Tray. For example, if
APS is selected for the initial paper tray setting, a ratio setting other than AMS will
be ignored.
❒ Setting options: AMS; 1.00; ratio 0.25~4.00
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 3.
Magnification to display the Magnification Initial Setting Screen.
2 The default setting is 1.00.
Select the desired setting from the Magnification Initial Setting Screen:
To select 1.00 if it is not already highlighted, touch 1.00.
To select another ratio, touch upper/lower arrow key to display the desired ratio, or enter a
3-digit ratio using the keypad on the control panel.
To select AMS, touch AMS.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the System/Copier Setting Menu Screen.
5 If no further changes are required, turn the machine power OFF then ON for normal copying
operations.
System/Copier Setting Menu Screen Copier Initial Setting Screen
Magnification Initial Setting Screen
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine
Mail Address