Filter
Top Products
– 12 –
Chapter 2
PCI-1712/1712L User’s Manual
Advantech Co., Ltd.
www.advantech.com
2.4 Device Setup & Configuration
The Device Installation program is a utility that allows you to set up,
configure and test your device, and later stores your settings on the
system registry. These settings will be used when you call the APIs of
Advantech 32-bit DLL drivers.
Setting Up the Device
Step 1: To install the I/O device for your card, you must first run the
Device Installation program (by accessing Start/Programs/
Advantech Driver for 95 and 98 (or for NT)/Device Installa-
tion).
Figure 2-4: The Advantech Device Installation utility program
Step 2: On the Device Installation program window, select the Device
menu item on the menu bar, and click the Setup command (Fig.
2-4) to bring up the I/O Device Installation dialog box (Fig. 2-
5). You can then view the device(s) already installed on your
system (if any) on the Installed Devices list box.
Figure 2-5: The I/O Device Installation dialog box