Filter
Top Products
Device Installation
Step 1: Run the Device Installation program (by
accessing Start/Programs/ Advantech
Driver for 95 and 98 (or for NT)/Device
Installation).
Step 2: On the Device Installation program
window, select the Device menu item on
the menu bar, and click the Setup
command to bring up the I/O Device
Installation dialog box as below:
Step 3: Scroll down the List of Devices box to find
the device that you wish to configure,
then click the Add button to bring up the
Device Found(s) dialog box as shown
below:
Step 4: After selecting a device and click OK, the
Device Setting dialog box will pop up.
You can configure various settings for the
selected device.
Step 5: After you have finished configuring of the
device, click OK and the device will
appear in the Installed Devices box as
seen below:
Step 6: After your card is properly installed and
configured, you can click the Test button
to test your hardware.
Step 7: You can test your hardware by using the
testing utility we supplied. For more
detailed information, please refer to
Chapter 2 of the User’s Manual .