Lantronix XSENSO 21R2 Switch User Manual


 
18: Advanced Settings
xSenso User Guide 105
Telnet Settings
The telnet settings control CLI access to the xSenso over the Telnet protocol.
Table 18-3 Telnet Settings
To Configure Telnet Settings
Using Web Manager
To configure Telnet settings, go to the Admin tab/page, click CLI in the menu and select
Configuration.
Using the CLI
To enter the Telnet command level: enable -> config -> cli -> telnet
Using XML
Include in your file:
<configgroup name=”telnet”>
and
<configitem name=”state”>
and
<configitem name=”authentication”>
SSH Settings
The SSH settings control CLI access to the xSenso over the SSH protocol.
Table 18-4 SSH Settings
Telnet Settings Description
Telnet State Enable or Disable CLI access via telnet
Telnet Port Enter an alternative Telnet Port to override the default used by the CLI server.
Blank the field to restore the default.
Telnet Max Sessions Specify the maximum number of concurrent Telnet sessions that will be allowed.
Telnet Authentication Enable or Disable authentication for telnet logins.
SSH Settings Description
SSH State Select to Enable or Disable CLI access via telnet.
SSH Port Specify the SSH Port and override the default, as needed. Blank the field to
restore the default.
SSH Max Sessions Specify the maximum number of concurrent SSH sessions that will be allowed.