Filter
Top Products
11: Logging
xSenso User Guide 63
Data Logging Configuration
Table 11-4 Data Logging Settings
To Configure Data Logging Settings
Using Web Manager
To configure data logging, click the Logging tab to get to the Logging page.
Data Logging
Settings
Description
Filename Enter the filename of the log file. This will be saved in the browser's sandbox
filesystem.
Period Specify in seconds, how often the browser will poll data from the xSenso device.
Title
Specify the title as it will appear in the log files.
You can use this besides the
filename to identify each data logging session.
Header‘
Check to enable or disable the header in the log files.
Header gives you
description of each column in the log file, e.g. Date and Time, Input 1 and
Input 2.
Timestamp Select timestamp logged should be generated from local PC running the web
browser or time (uptime/clock) coming from the device.
Input Check the analog inputs to be included in logging.
Output Check the analog outputs to be included in logging.
Note: This option is only supported in xSenso 21A2.
Relay Check the relay outputs to be included in logging.
Note: This option is only supported in xSenso 21R2.
Start Data Logging Click button to manually begin data logging according to current user settings.
Stop Data Logging Click button to manually stop data logging.
Refresh Files
Click button to refresh log files list.
List may need to be refreshed in order to
view all log files created when multiple data logging session happens on
the same PC.
Remove All Files
Click button to delete any accumulated logs from
from browser's sandbox
filesystem
.