Filter
Top Products
13: Action Settings
xSenso User Guide 68
Table 13-4 Send Email Settings
SSH Username Specify the SSH Client User for the SSH outgoing connection if the SSH protocol
is selected for this connection. You may select from the drop-down menu of
existing users or you may enter a new user name. This configuration field is only
available if the SSH protocol is selected.
AES Encrypt Key Enter an AES encryption key to encrypt outgoing data and select Hexadecimal
or Text. This configuration field is only available if either TCP AES or UDP AES
protocol is selected.
AES Decrypt Key Enter an AES decryption key to decrypt incoming data and select Hexadecimal
or Text. This configuration field is only available if either TCP AES or UDP AES
protocol is selected.
Validate Certificate Check to enable or disable validation certificate, if SSL protocol is selected. This
configuration field is only available if the SSL protocol is selected.
Enabling Validate Certificate requries the server to verify the remote SSL
server certificate when making a connection.
Disabling Validate Certificate causes the server to skip verification of the
remote SSL certificate.
Credentials Specify the name of the set of RSA and/or DSA certificates and keys to be used
for the SSL connection. This configuration field is only available if the SSL
protocol is selected.
Send Email Settings Description
Add an Action
(drop-down menu)
Select Send Email for the alarm or report. Repeat entry for the fields below of
each email.
Alarm Email Select an alarm profile number which will send an email when the alarm is turned
on. Multiple connection and reporting options will appear.
Normal Email Select an alarm profile number which will send an email when the alarm is turned
off. Multiple normal email configuration options will appear.
Reporting Check the types of reporting to include:
Serial Number
System Long Name
Terminal Block
Barrel Connector
Analog Input 1
Analog Input 2
Analog Output 1 (for xSenso 21A2 only)
Analog Output 2 (for xSenso 21A2 only)
Relay Output 1 (for xSenso 21R2 only)
Relay Output 2 (for xSenso 21R2 only)
Note: Your reporting selections made here will apply for both the alarm and
normal emails established.
Alarm Message Specify the message that would appear in the alarm email message to be sent.
Alarm Reminder
Interval
Specify how long to wait in minutes after the alarm stays on before another alarm
email is sent. Blank the display field to disable reminders. Email will only be sent
once by default.
Normal Message Specify the message that would appear in the normal email message to be sent.
Make Connection
Settings (continued)
Description