Filter
Top Products
20
Instruction manual V 6.0 - 08/2006
3. Safety
3.1 Safety instructions
This instruction manual contains important in-
structions and information regarding the opera-
tional safety and maintenance of the instrument.
The instruction manual is an important part of the
product, which must be read carefully prior to
setup and use and must always be kept near the
instrument.
This Instruction manual must be ap-
propriately supplemented as re-
quired by the existing regulations
on accident prevention and environ-
mental safety in the operator‘s
country.
Be sure to comply with the safety instructions and warnings in this chapter.
Read these instructions, even if you are already familiar with the operation and use of
other Leica products.
The Leica CM3600 was built and tested in accor-
dance with the safety regulations for electrical
measuring, control, regulating and laboratory
devices listed below:
• DIN EN ISO 9001,
• EN 61010-1, EN 61010-2-010,
• EN 292-1, EN 292-2,
• EN 614-1,
• EN 954-1,
• EN 1050,
• EN 61326-1,
• EN 61000-3-3
In order to maintain this condition and ensure safe
operation, the operator must observe all the in-
structions and warnings contained in this instruc-
tion manual.
The protective devices on both instrument and accessories must neither be removed nor
modified. Only qualified service personnel authorized by Leica may repair the instrument
and access its internal components.
3.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis for
accident prevention. Primarily responsible for accident-free operation is above all the institution
which owns the instrument and, in addition, the designated personnel who operates, services or
repairs the instrument.
To ensure trouble-free operation of the instrument, be sure to comply with the following instruc-
tions and warnings.