Filter
Top Products
24
Instruction manual V 6.0 - 08/2006
As you work through the instruction manual, familiarizing
yourself with the instrument, do not yet install a knife or
specimen.
Below you find a summary of all warnings contained in this instruction
manual.
Any use of the instrument not described in this instruction
manual is considered improper.
Always swing the knee lever upwards before leaving the
instrument.
When opening the chamber lid, the lid retainer must engage.
Prior to exchanging the fuse in the socket panel, switch the
instrument mains switch off and unplug the instrument from
mains. Only use fuses of the same type and characteristics as
originally supplied (see chapter 2.2 ‘Technical data’ for fuse
specification).
The control PC as well as all peripherals connected to it
(printer, monitor, etc.) are set to an input voltage of 230V/50Hz.
For reasons of compatibility (CE Directives, UL Approval) they
may only be connected to the socket panel of the instrument,
using the connecting cables supplied.
Prior to any work involving the knife, microtome or inside the
cryochamber, activate the emergency stop switch. For further
information, refer to chapter 3.4.1.
3. Safety