Leica CM3600 Copier User Manual


 
21
Leica CM3600 – Cryomacrotome
3.3 Safety standards
The Leica CM3600 was built and tested in accordance with the safety
regulations for electrical measuring, control, regulating and laboratory
devices listed below:
DIN EN 292,
DIN EN 55011,
DIN EN 61010-1,
IEC 1000-4,
IEC 50082-1,
MedGV.
In order to maintain this condition and ensure safe operation, the opera-
tor must observe all the instructions and warnings contained in this
instruction manual.
3.4 Safety devices
3.4.1 Emergency stop switch
The Leica CM3600 is equipped with an emergency stop switch (1) located
on the chamber surface to the left of the window.
Activating the emergency stop switch
Press the Emergency stop switch (1) to stop the microtome immediately.
Resetting the emergency stop switch.
To reset the emergency stop switch (1) turn it in the direction of the arrow
until it is released upwards back to its original position.
3. Safety
1