Filter
Top Products
46
Instruction manual V 6.0 - 08/2006
Click on the activated set value field to modify the setting.
PAUSE button
Clicking on this button stops the sectioning program. Clicking on the
button once more restarts the sectioning program, resuming the current
section where if was left off.
6.4.8 Sledge speed
Indication of current sectioning or return stroke speed in mm/s (millime-
ters per second). To modify any of the settings, click on the correspond-
ing value.
The graphic display is active only while sectioning is in progress. The
currently selected sectioning and return stroke speed are displayed via a
green bar on a scale from 0 - 80 mm/s.
6. Software