Filter
Top Products
Menu item Description
Ring Tone Volume
None
Min
Middle
Max
Specifies the volume for the incoming faxes
Note: Max is the factory default setting.
Line Type
PSTN
PBX
Specifies the line type
Note: PSTN is the factory default setting.
Dialing Type
PB
DP(10PPS)
DP(20PPS)
Specifies the dialing type
Note: PB is the factory default setting.
Junk Fax Filter
Off
On
When Junk Fax Filter is set to On, incoming faxes are accepted
only from numbers registered in the Address Book.
Note: Off is the factory default setting.
Remote Receive
Off
On
Specifies whether to receive a fax by pressing the remote
receive code on the external telephone after picking up the
handset of the telephone. When Remote Receive is set to On,
a fax can be received by pressing the remote receive code on
the external telephone.
Note: Off is the factory default setting.
Remote Rcv Tone
00–99
Specifies the tone in two digits when Remote Receive is set to
On
Note: 00 is the factory default setting.
Duplex Print
Off
On
Specifies whether to use duplex printing when receiving a fax
Notes:
• Off is the factory default setting.
• This option is available only when the printer has a duplex
unit installed.
Send Header
Off
On
When Send Header is set to On, the sender record is printed at
the head of the fax.
Note: On is the factory default setting.
Company Name
<input company name>
Specifies the sender name to be recorded in the sender report
Your Fax Number
<input fax number>
Specifies your telephone number, which is printed at the top
of each page sent from your printer
Device Name
<input device name>
Specifies your name or your company name, which is printed
on the report sheet
Understanding printer menus
138