Filter
Top Products
Restart Printer
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Check all cable connections.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
If the message appears again, contact Customer Support, and report the message.
Hard Drive Full
Error 016-982
Press OK
There is insufficient memory to complete the current print job. Press OK to clear the message, and then cancel the
print job and try sending it again.
Insert <color>
Print Cartridge
Error 093-<number>
The specified print cartridge is missing or not installed correctly. Reinstall the print cartridge.
Insert Fuser, Restart Printer
The fuser is not installed. Install the fuser.
Insert Transfer Unit
The transfer belt is missing or not installed correctly. Reinstall the transfer belt.
Insert Tray 2
Tray 2 is missing or not installed correctly. Install or reseat Tray 2.
Invalid Job
Error 016-799
Press OK
The configuration of the printer in Print Properties does not match the printer being used.
1 Press Stop to cancel the print job.
2 Check the Print Properties settings.
3 Press OK to continue.
Understanding printer messages
151