Filter
Top Products
Creating an administrator password for the
Embedded Web Server
1 Open a Web browser.
2 In the address bar, type the IP address of the printer, and then press Enter.
If the Java applet screen appears, click Yes.
3 Click Properties.
4 Under Security, click Administrator Security Settings.
5 Select the Enable Administrator Mode check box.
6 Fill in the log-in information:
a In the User Name field, enter the log-in name for the administrator.
b In the Password field, enter the log-in password.
c In the Verify Password field, re-enter the log-in password.
7 Click Save Changes. The new password has been set and anyone with the administrator name and password
can log in and make changes to the printer configuration and settings.
Creating e-mail alerts
Note: In order to use this function, Email Server (SMTP) must be configured from the Embedded Web Server.
When connected to a network environment in which sending and receiving of e-mail is possible, the printer can send
an e-mail report to specified e-mail addresses containing the following information:
• Network settings and the printer status
• Status of errors which have occurred on the printer
To set up e-mail alerts for this printer:
1 Open a Web browser.
2 In the address bar, type the IP address of the printer, and then press Enter.
If the Java applet screen appears, click Yes.
3 Click Properties.
4 Click Mail Alerts.
5 Select the Enable Mail Alerts check box.
6 Fill in the Mail Address fields with the desired e-mail addresses.
7 Click the Notification Items you want to include in the e-mail message.
8 Click Save Changes.
Administrative support
172