Filter
Top Products
5 Press or repeatedly until Nearest Size appears, and then press OK.
6 Press repeatedly until Select Function appears.
Unexpected page breaks occur
1 Make sure the printer is on and Select Function appears.
2 From the printer control panel, press System.
3 Press or repeatedly until Admin Menu appears, and then press OK.
4 Press or repeatedly until System Settings appears, and then press OK.
5 Press or repeatedly until Time-Out appears, and then press OK.
6 Press or repeatedly until On appears, and then press OK.
7 Press or repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
8 Press or repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.
9 Press repeatedly until Select Function appears.
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
ARE THERE ANY ERROR MESSAGES ON THE DISPLAY?
Clear any error messages.
CHECK THE POWER
Make sure the printer is plugged in, the power is on, and Select Function appears.
Scanner unit does not close
Make sure there are no obstructions:
1 Lift the scanner unit.
2 Remove any obstruction keeping the scanner unit open.
3 Lower the scanner unit.
Poor copy quality
These are some examples of poor copy quality:
• Blank pages
• Checkerboard pattern
• Distorted graphics or pictures
Troubleshooting
175