Filter
Top Products
106
Change Tray <x>
What this message means:
The printer is requesting different paper than what is loaded in the specified tray or defined by
the Paper Size or Paper Type settings for that tray.
What you can do:
•
Load paper of the requested size and type in the tray specified on the display. The printer
automatically clears the message and continues printing the job.
• Press Select to clear the message and continue printing on the paper currently loaded in the
tray.
• Press Menu to open the Job Menu and cancel the current job.
Check <device>
Connection
What this message means:
The specified device is either not fully connected to the printer or is experiencing a hardware
failure.
What you can do:
•
Reestablish communication by removing the specified device and reattaching it to the printer.
• Press Go to clear the message and continue printing.
• If a hardware failure occurs, turn the printer off and back on. If the error recurs, turn the printer
off, remove the specified device, and call for service.
Clear Job
from Finisher
What this message means:
The printer detects a paper jam, and you must remove the stack of paper in the finisher as well
as clear the jam.
Note:
Clear Job from Finisher
alternates with the
2xx Paper Jam
or the 28x Staple
Jam message.
What you can do:
Clear paper from the entire paper path. Press Go to clear the message and continue printing.