Filter
Top Products
37
11
Loading a paper tray
Complete these instructions to load print materials into any of the standard or optional trays.
1 Remove the paper tray.
2 Pull the width guide tab and slide the width guide to the far right side of the tray.
3 Squeeze the length guide lever and slide the length guide to the correct position for the size
paper you are loading.
4 Place the paper into the paper tray with the recommended print side face down for
single-sided printing and face up for double-sided printing. Do not fill paper above the paper
capacity mark.
5 Pull the width guide tab and slide the width guide to the left until it lightly rests against the edge
of the paper stack.
Pull here
Length
guide
Paper size
indicators
Width
guide
Length guide
lever
Paper capacity
mark