Filter
Top Products
142
Staple Job
Purpose:
To set stapling as the default for all print jobs. (Select stapling from the printer driver if you want to
staple only specific jobs.)
Values:
Note: Staple Job is displayed only when a finisher is installed.
Staple Prime Src
Purpose:
To specify the paper source you want the printer to use when the Prime Stapler is selected from the
Job Menu.
Values:
Note: Staple Prime Source is displayed only when a finisher is installed.
See also:
Prime Stapler
Off* Does not staple print jobs.
On Staples each multi-page print job sent to the printer.
Tray <x> (Tray 1*) Selects paper from the specified tray.
MP Feeder Selects paper from the multipurpose feeder.
Manual Pap Selects a sheet of paper inserted in the manual feed slot.