Filter
Top Products
132
What you can do:
•
Press Go to clear the message. The printer discards any data received through the serial port.
• Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled.
What this message means:
Data has been sent to the printer through a parallel port, but the parallel port is disabled.
What you can do:
•
Press Go to clear the message. The printer discards any data received through the parallel
port.
• Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled.
58 Too Many
Bins Attached
What this message means:
•
Too many output bins are installed on the printer.
• An unsupported configuration of output bins is installed on the printer.
What you can do:
Turn off and unplug the printer. Remove or reconfigure the output bins. Plug in the printer and
turn it on.
58 Too Many
Disks Installed
What this message means:
Too many hard disks are installed on the printer. The printer only supports one hard disk at a
time.
What you can do:
Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the
printer and turn it on.
56 Parallel
Port <x> Disabled
56 Std Parallel
Port Disabled