Filter
Top Products
117
What you can do:
•
Send a job to print.
• Press Go to quickly warm the printer to normal operating temperature and display the Ready
message.
Note: This message does not appear on the T620 printer.
See also:
Power Saver (Setup Menu)
Priming Failed.
Retry?
What this message means:
The printer failed to prepare the stapler to staple print jobs.
What you can do:
•
Press Go to try priming the stapler again.
• Make sure staples are loaded and there is no jam in the stapler.
• Make sure paper is loaded in the tray specified in the Staple Prime Source menu item.
• Press Return or Stop to cancel priming.
Priming Stapler
What this message means:
The printer is preparing the stapler to staple print jobs. The printer tests the stapler several
times before returning to the Ready state.
What you can do:
Wait for the message to clear.
Print Jobs on
Disk. Go/Stop?
What this message means:
Jobs that were spooled to the hard disk before the printer was last turned off have not yet
printed.
What you can do: