Filter
Top Products
200
b Pull the tray straight out toward you to remove the upper tabs from the output expander
slots.
3 The output option may have a wire paper bail attached. If so, remove the tips of the paper bail
from the ends of the plastic bracket on the bottom of the output option.
Refer to the Setup Guide when you are ready to reattach the paper bail to an output option.
4 Carefully lift the option straight up until it is completely disconnected from the option below it or
from the printer. Set it aside.
WARNING: The edges of the mounting brackets could damage tabletops or fabrics.
5 Refer to the Setup Guide when you are ready to reattach options.