Filter
Top Products
109
Disk Recovery
x/5 yyy%
What this message means:
The printer is attempting to recover the hard disk after finding errors on it. The disk recovery
takes place in five phases. The second line on the operator panel shows the percent complete
of the current phase.
Note: Errors can occur if the printer is powered off while writing to the disk.
What you can do:
•
Wait for the message to clear. No button actions are possible while this message is displayed.
• To avoid this error in the future, do not turn off the printer unless Ready is displayed on the
operator panel.
Enabling Menus
What this message means:
The printer is responding to a request to make the menus available to all users.
What you can do:
Wait for the message to clear and then press Menu to view the menus from the operator panel.
See also:
Disabling operator panel menus
Energy Conserve
SAVED
What this message means:
Someone has changed the Energy Conserve setting in the Config Menu. This setting
determines the values available for the Power Saver menu item.
What you can do:
•
Wait for the message to clear.
• Open the Power Saver menu item in the Setup Menu to verify the current default setting or
select a new setting.
See also:
Power Saver; Disabling Power Saver;Technical Reference