Filter
Top Products
27
8. The disk cover shaft is removed and pulling out disk
cover is removed from the disk cover.
9. Remove the 8 screws (J), 3 screws (K), 3 screws
(L), 4 screws (M) and 1 screw (N).
Screw (J) : DXQT2+E6FNL (N10)
Screw (K) : DRQT2+E8FKL (N2)
Screw (L) : DXQT2+E10FNL (N8)
Screw (M) : DXQT2+F3FNL (N16)
Screw (N) : DXHM0056ZA (N4)
Disk Cover
Disk Cover Shaft
10. CN26 (FAN) and CN15 (SP) are removed. A top
case is lifted and FFC (PAD), FFC (DRIVE) and
CN27 (solenoid) are removed and then the top case
is removed.
Screw (J)
Screw (J)
Screw (M)
Screw (M)
Screw (J)
Screw (N)
Screw (M)
Screw (K)
Screw (L)
Screw (K)
Screw (M)
Screw (J)
FFC(SW)
Top Case
CN26
CN15
FFC(PAD)
Solenoid Cable
9.2.5. Removing the SUB DVD
Preparation : perform the section 9.2.1., 9.2.3.
and 9.2.4. first.
1. Peel off the tape.
2. Remove the 2 screw (O) and then remove the SUB
DVD.
Screw (O) : DXHM0056ZA (N4)
Note:
Note it that the disc eject knob comes off at the same
time.
Top Case
Disk Eject Knob
SUB DVD
Screw (O)