Filter
Top Products
44
9.3.3.5. Assembly of the Card Bus Ejector
PET Tape (19mmX25mm)
PET Tape (10mmX25mm)
LAN ESD Sheet
PET Tape (19mmX25mm)
PAD connector central standard
Connector central standard
Connector central standard
Connector externals
standard
Connector externals
standard
Connector externals
standard
Connector externals
standard
Side where tape exists
on the other side
The transformer is
completely covered.
Connector
The lever is drawn to the
right before building in
The lever is drawn to the
left before building in
Bend
Square hole
<Explanation 1>
The sheet metal bend part of Connector is
inserted in the corner hole part
(An opposite direction is also the same)
Multiply hook surely (There must not be floatage)
Externals match of IC
0-1mm
Externals match of
connector
0-1mm
Tape