Filter
Top Products
28
9.2.7. Removing the Solenoid / Disc Cover
Lock
Preparation : perform the section 9.2.1., 9.2.3.
and 9.2.4. first.
1. Remove the solenoid line hold sheet and cable fixed
sheet.
Solenoid line hold sheet : DFHR3D20ZA (K122)
2. Remove the 1 screw (Q) and the solenoid from the
top case.
Screw (Q) : DXHM0056ZA (N4)
9.2.6. Removing the Touch Pad / LCD
Knob
Preparation : perform the section 9.2.1., 9.2.3.
and 9.2.4. first.
1. The pad top ring fixed to the pad cover by the both
sides tape is removed, and remove the screw (P).
Screw (P) : DXHM0057ZA (N5)
2. Peel off the pad sheet.
The LCD knob is lifted from a top case, and remov-
ing LCD knob is removed from the knob side in the
LCD latch spring.
Note:
The pad sheet cannot be recycled. Please use
new parts.
Top Case
Pad Ring Top
Screw (P)
Pad Cover
Touch Pad
Tape
Pad Button
Pad WP Sheet
LCD Latch Spring
Top Case
LCD Knob
Note:
The each cable fixed tapes cannot be recycled.
Please use new parts.
3. Remove the disc cover lock spring, and slide the
disc cover lock and then remove.
Top Case
Screw (Q)
Solenoid Line Hold Sheet
Cable Fixed Sheet
Top Case
Disk Cover Lock Spring
Disk Cover Lock
Note:
When expanding or transforming, the disk cover knob
spring cannot be recycled.