Filter
Top Products
42
9.3.3.2. Putting MCH Sheet / Heat Spreader Bottom
Sheet side of Heat Spreader Bottom
Grease1 (G-751)
Bottom side Heat Sheet
preparation specification
MCH externals
standard 0 1mm
Processes along the
DIMM connector
Running aground do not be on DAI
Coil externals standard.
Thing in which affixation
does not exist in coil.
Coil externals standard
MCH externals
standard 0 1mm
Line Hold Sheet
Line Hold Sheet 1
Touch the DIMM Connector
Affixation space 0-1mm
Affixation as touch the Coil
Space 0-1mm
Affixation as fit the
CPU Cushion
Space 0-0.5mm
CPU Cushion externals
standard 0 1mm
Affixes in the silk frame
Affixes to the capacitor
Antenna Cable is drawn out here
Antenna Cable
Affixes in a Sheet externals standard,
and fixes Antenna Cable.
CPU Cushion
CPU Thrmal Sheet
Coil externals
standard 0-1mm
Heat Spreader Bottom
CPU Thrmal Tape
CPU Thrmal Sheet is
a thing to the
capacitor without
running aground
It is confirmed that CPU Thrmal
Sheet does not run aground to the
capacitor
Safety work
Safety work
Safety work
The flaking off paper in which "5011"
is displayed is peeled off and then
affixes to MCH.
Antenna Cable fixes by Line Hold
Sheet 1 by processing on the Heat
Spreader Bottom Sheet.
Spreads by using the treatment
device.
1-2mm