Filter
Top Products
57
Affixation
Disk Lever Fix Cushion
SW PCB
< SW PCB >
yellow line
yellow
line
Safety work
When the SW PCB positioning
is not used, the cabi positioning
treatment device pin on becomes
the center of this hole and fixes.
SW PCB which has been
prepared is installed.
Operativeness confirmation
DFBD9006ZA-0
Confirmation
Convex having
=9009ZA-0
Convex=9006ZA
<Disk Eject Knob ASSY2 installation position>
Disk Cover Lock Holder
Thing that fingernail
on both sides hangs
The fingernail is held with
the treatment device in
the direction of the arrow.
Safety work
Disk Eject Knob
ASSY installation.
Screw (DXHM0056ZA)
Screw (DXHM0056ZA)
The SW lever is put between ribs
of Disk Eject Knob Assy
Safety work
When Screw is concluded, concludes
because Disk Eject Konb Assy is drawn
in the arrow direction.
Hook Side
Disk Cover Lock Holder
installation
The hook in spring for the Disk Cover
knob is put on the cabinet rib on
The Disk Cover Lock Assy fittings which
have been prepared are installed
Thing that Hook hangs
Insertion in Disk
Cover Lock Spring
The hook is passed through the hole
of the Disk Cover lock Assy fittings
When expanding or
transforming, it is not
possible to recycle
The part of R type of the Disk Cover Lock and the part
of the pin of the Disk Cover Lock holder are matched
and installs