Matsushita CF-Y5LWVYZ 1 2 Laptop User Manual


 
53
9.3.4.6. Putting Sheet
(1.0)
Puts by the standard on the left.
Affixes Palmrest Sheet (L)
Affixes KBD fixation tape
Affixes Disk angle cushion
Affixes Disk angle
cushion
Affixes Disk cover cushion
Affixes Disk shaft
fixation seat
Affixes Disk cover seat
Affixes the concave round type
part of a top case (four places).
Safety work
All are peeled off after putting
of the level peel positioning
the half and the flaking off
paper is put.
Puts within the range in the concave
happened top part.
(It is confirmed that there is not
running aground. )
Do not touch the paste side.
(garbage adhesion and down of
paste strength prevention)
Thing without bubble generation
Thing without lattice eyes transparent
of paste confirmation
From 0.5 or less to inclination 0.2 or
less to concave bottom case part and
seat externals space difference
< disk cover seat putting position >
Pressurize the
side putting part.
< KBD fixation tape putting position >
< disk shaft fixation seat putting position >
Along U ditch
and puts.
< disk angle cushion putting position >
Direction of length hand of disk angle cushion