Filter
Top Products
66
9.3.5.4. Putting Foot Rubber
<FIG1>
Foot Rubber
Foot Rubber Support
Foot Rubber Support
<Notes and procedures when rubber foot / rubber foot (center) putting>
1) Wipe rubber foot/ rubber foot (center) pasting side
with the dry cloth (3 places)
(Cautions) - Exchange the cloth (rag)
wiped off regularly (twice / day)
2) A rubber foot/rubber foot(center) pasting
(Cautions) - Put on the Bottom Case with tweezers etc.
- Paste so as not to touch the sticking side.
3) Pressurizing (treatment device use) condition:
Pressurizing power : 2.5kgf or more,
Time : 3 seconds or more
Adjust the inclination of the direction of
the length hand to 0.2 or less
Do not pressurize the concave
Bottom Case part
(Sheet concave measures).
Do not go out of the rib
heaven side
Bottom BATT Sheet
Put on the rib side
Ref to FIG 1
Affixes to the concave part.
Pressurizing treatment device use
Affixes to the concave part.
Pressurizing treatment device use
Affixes to the concave part.
Pressurizing treatment device use
Bottom BATT Sheet
Work with a specified treatment device when you pressurize Foot Rubber and Bottom BATT Sheet .
Safety Work
Safety Work
Safety Work
Safety Work
Safety Work
Screw
(XSB2+4FNL)
Installation
-Please work after installs in the treatment
device when you tighten the screw.
(Attention)