Filter
Top Products
71
9.3.6.5. Installation of LCD Unit
Be along the root of
the wall of the LCD
Cable
Be careful not to cover
this hole with the
Conductive Cloth
The inverter cable
is LCD cable back
Pass between cushions
with the bottom
case boss
On slope part
of hinge metal
fittings
Safety work
Bottom case rib side
Cable black
tape
externals
0-1
Put Conductive Cloth
with the black tape left
end of the cable set to
the bottom case side
Thing without Cable
within 8
(Copper Foil = 9)
Prevent the cable from
being within 8
(Copper Foil = 9)
Insert CN of the inverter cable
and make the main substrate
under slipped
Conclude DXYN26+J6FNM A B
Set the LCD Block
EMI sheet 3
Insert the inverter
cable in CN
Paste EMI sheet 3
The EMI sheet 3 removes
a half exfoliation paper, and
twists around a LCD cable,
and one of the two sticks it
on a bottom case.
15-20
Side with comb
dentiform
Side with
'I-PEX' stamp
A
B
Cautions
Cannot be repetition used because
of use of a fixed type lock agent.
Exchange for a new article in the case of re-bolting.
Attach the LCD Unit to
the Bottom Case by left
justify