Filter
Top Products
I-3
Index
Index
MAP 0500 - Port failure or link incident
analysis 3-16
MAP 0600 - Fabric or ISL problem
analysis 3-27
summary 3-2
fenced E_Port
description 3-33
fault isolation 3-27
fiber-optic protective plug
description 1-10
illustration 1-10
filecenter (download firmware) 4-6
firmware
determine version 4-22
download from filecenter 4-6
download from PC hard drive 4-22
FL_Port
configure 2-14
description 1-2
Flexport Technology
configure PFE key 2-20
description 2-20
FRU removal
SFP transceiver 5-3
tools required 5-3
FRU replacement
SFP transceiver 5-4
tools required 5-3
FRUs
description 1-2
illustrated parts breakdown 6-1
SFP transceiver 1-3
status LEDs 1-5
full-fabric capability
configure PFE key 2-20
description 2-20
full-volatility feature
configure PFE key 2-20
description 4-18
G
gateway address
change switch address 2-12, 2-23
switch default 2-1, 3-1
I
illustrated parts breakdown
front-accessible FRUs 6-2
miscellaneous parts 6-3
power cords 6-4
IML switch 4-4
IML/RESET button
function 1-4
location 1-2
insistent domain ID 2-9
installation tasks
summary 2-2
Task 1 - Verify installation requirements 2-2
Task 2 - Unpack, inspect, and install the
product 2-3
Task 3 - Configure product at the EFCM
Basic Edition interface 2-6
Task 4 - Configure product network
information (optional) 2-23
Task 5 - Cable Fibre Channel ports 2-26
Task 6 - Configure zoning (optional) 2-26
Task 7 - Connect product to a fabric element
(optional) 2-27
Task 8 - Register with the McDATA file
center 2-28
internal loopback test 4-15
interop mode 2-12
interswitch link
configure performance features 2-22
description 1-2
fault isolation 3-27
port fencing 2-22
preferred path 2-22
IP address
change switch address 2-12, 2-23
switch default 2-1, 3-1
L
laser transceiver
compliance statement xiv
description 1-3
illustrated parts breakdown 6-2
removal 5-3
replacement 5-4
types available 1-3