Filter
Top Products
116
PTZ camera setting
You can make settings for controlling each of connected
cameras.
RS232C
integral camera
RS422
integral camera
PTZ camera
Recorder
Step
1 Make detailed settings for the connected
cameras.
[Protocol]: You can set the type of the camera
connected.
[Port]: You can set the port to output control signal.
The port is automatically selected according to the
input of the camera.
[ID]: You can set the address of the camera to be
controlled. Set the ID same as that of the camera.
[Reverse]: You can reverse the panning/tilting
direction depending on the installation condition.
Tips
• Operation of the camera may become impossible for
some reason such as a specification change of the
camera. In addition, some functions may become
invalid.
• Operations or functions performed with this recorder
are simplifi ed ones. They are not equivalent to those
of special control devices.
Various settings (continued)
Setup menu