Filter
Top Products
30
You can set the operation conditions and perform various controls using the menus.
There are 3 methods to set the menus as described below.
Set the menus automatically ( Pages 34 and 35)
When you turn on the recorder for the fi rst time, the Setup Wizard screen is displayed and you can confi gure the minimum
required settings according to the displayed menus.
Set the menus manually
You can manually change the settings made by the Setup Wizard or manually confi gure settings other than those made by
the Setup Wizard. For how to locate setting items, see
page 2.
Copy the menu settings of other DX-TL5716E ( Page 113)
You can set the recorder's menus by copying the menu settings of other DX-TL5716E to externally connected media and
then loading those settings.
Displaying the menus
When you press the following buttons, the corresponding menus are displayed. (Check that no other menus or warnings are
displayed.)
Bookmark menu
Left-click
Search menu
Help menu
Detailed descriptions of
the menus and
warnings are displayed.
Main menu
You can set the
operation conditions of
the recorder.
Copy menu
Mouse
Right-click
Mouse operation screen
Mouse
Press while the
single screen
playback is in pause.
Press while the
single screen
playback is in pause.
You can copy data for a
short time of period.
Page 80
You can copy or archive
data based on the
conditions you specify.
Pages 80 to 83.
You can display these menus also
from the mouse operation screen.
You can display these menus also
from the mouse operation screen.
You can operate various functions of the recorder
using a mouse.
You can display the Search menu, Copy menu,
Bookmark menu, and Help menu also from the
mouse operation screen.
Pages 32 and 33.
You can register
bookmarks.
Page 79
You can search for
bookmarked images.
Page 79
You can search for
desired images.
Pages 72 to 76.
Inside the front
door of the
recorder
Notice
• When the multiplexer Output B is selected, menus cannot be displayed. In addition, when you operate the recorder by
a mouse, the mouse cursor is displayed but no menus are displayed and you cannot confi gure the menu settings. You
can set the menus only when Output A is selected. (
Page 43)
How to set the menus