Filter
Top Products
61
List of parameters classified by purpose of use
2
FUNCTIONS
2.2 List of parameters classified by purpose of use
Set the parameters according to the operating conditions. The following list indicates
purpose of use and corresponding parameters.
Purpose of Use
Parameter Numbers
Parameter numbers which must be set
Related to operation
Use of extended function parameters Pr. 30
Operation mode selection
Pr. 53, Pr. 79
(Communication parameters n10, n17)
Acceleration/deceleration time/pattern
adjustment
Pr. 7, Pr. 8, Pr. 16, Pr. 20, Pr. 29, Pr. 44, Pr. 45
Selection of output characteristics
optimum for load characteristics
Pr. 3, Pr. 14, Pr. 19, Pr. 44, Pr. 45
Output frequency restriction (limit) Pr. 1, Pr. 2
Operation over 60Hz
Pr. 1, Pr. 38, Pr. 39,
calibration parameter C4, C7
Adjustment of frequency setting signals
and outputs
Pr. 38, Pr. 39, Pr. 73,
calibration parameter C2 to C7
Motor output torque adjustment Pr. 0, Pr. 98
Brake operation adjustment Pr. 10, Pr. 11, Pr. 12
Multi-speed operation
Pr. 1, Pr. 2, Pr. 4, Pr. 5, Pr. 6, Pr. 24, Pr. 25, Pr.
26, Pr. 27, Pr. 80, Pr. 81, Pr. 82, Pr. 83, Pr. 84,
Pr. 85, Pr. 86, Pr. 87
Jog operation Pr. 15, Pr. 16
Frequency jump operation Pr. 31, Pr. 32, Pr. 33, Pr. 34, Pr. 35, Pr. 36
Automatic restart operation after
instantaneous power failure
Pr. 57, Pr. 58, additional parameter H6
Slip compensation setting Pr. 95 to Pr. 97
Setting of output characteristics matching
the motor
Pr. 3, Pr. 19, Pr. 71
Related to application
operation
Electromagnetic brake operation timing Pr. 42, Pr. 64, Pr. 65
Sub-motor operation
Pr. 0, Pr. 3, Pr. 7, Pr. 8, Pr. 44, Pr. 45,
Pr. 46, Pr. 47, additional parameter H7
Operation in communication with
personal computer
Communication parameters n1 to n12
Operation under PID control
Pr. 60 to Pr. 65, Pr. 73, Pr. 79, Pr. 88
to Pr. 94
Noise reduction Pr. 70, Pr. 72