Filter
Top Products
Configuring the System 3-11
Advanced Menu - Advanced CMOS Setup
Menu Item Settings (default is bold)
Quick Boot
Enabled
, Disabled
When Enabled, the BIOS does not test system
memory above 1 MB or wait for ready signals, allowing
a quick boot.
Delay for Hard Drive
(seconds)
3,
Disabled
, 1 -10
Selects the amount of time for hard drive delay.
1st Boot Device
Floppy
, Disabled, IDE-0, IDE-1, IDE-2, IDE-3,
LS-120/Zip, ATAPI Zip, CDROM, SCSI, Network
Sets the diskette drive as the first boot device.
2nd Boot Device
IDE-0
Sets the second boot device.
3rd Boot Device
CD-ROM
Sets the third boot device.
Try Other Boot Devices
Yes
, No
Select Yes to cause the system to try to boot from
other boot devices if there is a boot failure. Selecting
No causes the boot to be carried out from selected
devices.
Floppy Access Control
Read-write
, Read-only
Select Read-write to allow the diskette drive to have
read-write capabilities.
S.M.A.R.T. for Hard
Disks
Disabled
, Enabled
Select Enabled to use the Self Monitoring Analysis and
Reporting Technology (S.M.A.R.T.) for reporting a
possible problem with an IDE device. After receiving
the warning, the BIOS alerts you to the problem.