Filter
Top Products
3-26 Configuring the System
Locating the system board jumpers
A
– Keyboard Wakeup (JKBV1)
D
– CPU Type (J23)
B
– Onboard Audio (JP3)
E
– Save to RAM (JP4)
C
– BIOS Recovery (J4)
F
– CMOS Clear (JBAT1)
Jumpers are set correctly at the factory for your
configuration. Only change the appropriate jumper setting for your
application. Otherwise, keep the jumpers at their factory settings.
Set the jumpers as follows.
1.
Power off and unplug the system and any external options. Remove
the system cover (see “Removing the Cover”).
2.
Locate the appropriate jumper block on the system board (see the
previous figure “Locating the system board jumpers”).