Filter
Top Products
Installing System Upgrades 4-7
Locating the memory module and processor sockets
A
– Memory Sockets 1 and 2
C
– Fan Connector (under CD-ROM drive)
B
– Processor Socket
Memory Upgrade
Memory upgrades are installed into two memory module sockets on the
system board. The sockets support up to 512 MB of high-speed memory.
The system supports 168-pin, 100-MHz non-ECC SDRAM modules in
64-, 128-, and 256-MB unbuffered memory configurations.
Use the following guidelines in selecting DIMM types:
memory can be installed in one or two sockets
the size of the DIMMs can vary between sockets
the speed of the DIMMs must match or exceed the processor bus
speed
single- and double-sided DIMMs are supported.
To determine what configuration of DIMMs to use, see the table
“Supported DIMMs.”
For sample memory configurations, see the table “Sample DIMM
Upgrade Paths.”