Filter
Top Products
Installing System Upgrades 4-5
6.
Press in on the sides of the cover and slide the cover about one inch
towards the front of the chassis.
Note
The cover is a one piece unit that fits tightly to the chassis. The
cover unit includes the top panel, left and right side panels, and front
panel. Do not attempt to separate the panels from the cover unit.
7.
Lift the cover off the system and set aside.
Removing the cover
A
– Cover
Replacing the Cover
Replace the cover as follows.
Ensure that all cables are positioned to prevent
crimping, abrasion, or cutting while installing the cover. Check that the
ribbon cables are folded along their fold lines and out of the direct path of
the cover.
1.
If removed, reinstall the mouse and keyboard anti-theft bracket, with
the mouse and keyboard cables inside the bracket.
2.
Position the cover over the chassis so that the front edge of the cover
is about one inch beyond the front edge of the chassis (see the
preceding figure).