Filter
Top Products
3-14 Configuring the System
Advanced Menu - Power Management Setup
Menu Item Settings (default is bold)
Hard Disk Power Down
Mode
Suspend
, Standby,
Disabled
Select Suspend or Standby to power down the hard
disk as a power saving feature.
Standby Time Out
(Minutes)
Disabled
, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in
full power on state before entering Standby state.
Suspend Time Out
(Minutes)
Disabled
, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in
Standby state before entering Suspend power state.
Power Button Function
Suspend
, On/Off
Suspend sets the power switch for Suspend (Sleep)
mode. With power on, pressing the switch once places
the system in sleep mode. Pressing and holding the
switch in for 4 seconds turns power off.
Restore on AC/Power
Loss
Last State
, Power Off, Power On
The Power On setting automatically turns power on
after a power loss. The Power Off setting requires the
user to restart the system with the power button. The
Last State setting restores the system to the state
where it was on power loss.
Resume on Ring Enabled,
Disabled
Enabled allows the system to boot up on an incoming
telephone call. Disabled causes the system to ignore
any incoming call from a modem.
Resume on LAN
Enabled
, Disabled
Enabled allows the system to boot up on an incoming
LAN signal. Disabled causes the system to ignore any
incoming signal from LAN.