Filter
Top Products
ProSafe VPN Firewall 200 FVX538 Reference Manual
5-2 Virtual Private Networking
v1.0, August 2006
Figure 5-1 shows the WAN Mode setup screen for Auto-Rollover Mode using WAN port 1. It also
shows the Protocol Bindings screen that displays if Load Balancing is selected. (When Load
Balancing is selected, no WAN Failure Detection Method fields are selectable.) This setup is
accomplished in “Configuring the WAN Mode (Required for Dual WAN)” on page 2-10.
The use of fully qualified domain names is:
• Mandatory when the WAN ports are in rollover mode (Figure 5-2 on page 5-3); also required
for the VPN tunnels to fail over.
Figure 5-1
Rollover Mode Setup Screen
Load Balancing Setup Screen