Filter
Top Products
ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-39
v1.0, August 2006
To configure an IKE Policy:
1. From the main menu, select VPN. The IKE Policies screen will display showing the current
policies in the List of IKE Policies Table.
2. Click Add to configure a new IKE Policy. The Add IKE Policy screen will display.
3. Enable Mode Config by checking the Yes radio box and selecting the Mode Config record
you just created from the pull-down menu. (You can view the parameters of the selected record
by clicking the View selected radio box.)
Mode Config works only in Aggressive Mode, and Aggressive Mode requires that both ends
of the tunnel be defined by a FQDN.
Figure 5-29