Filter
Top Products
ProSafe VPN Firewall 200 FVX538 Reference Manual
LAN Configuration 3-11
v1.0, August 2006
4. If desired, Enable the DHCP Server (Dynamic Host Configuration Protocol), which will
provide TCP/IP configuration for all computers connected to the router’s DMZ network. Then
configure the following items:
a. Starting IP Address – This box specifies the first of the contiguous addresses in the IP
address pool.
b. Ending IP Address – This box specifies the last of the contiguous addresses in the IP
address pool.
c. WINS Server – This box specifies the Windows Internet Naming Service Server IP.
d. Lease Time – This box specifies the Lease time to be given to the DHCP Clients.
e. Enable DNS Proxy – If enabled, the VPN firewall will as a DNS for address resolution.
5. Click Reset to cancel changes made on this screen and revert to the previous settings.
6. Click Apply to save your settings. The DMZ LED next to LAN port 8 (see “Router Front
Panel” on page 1-6) will light up indicating that the DMZ port has been enabled.
If another device on your DMZ network will be the DHCP server, or if you will manually
configure all devices, leave the Disable option (default) checked.
To define the DMZ WAN Rules and LAN DMZ Rules, see “Setting DMZ WAN Rules” on
page 4-10 and “Setting LAN DMZ Rules” on page 4-12, respectively.
Figure 3-5