Filter
Top Products
ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-5
v1.0, August 2006
7. Enter the Remote LAN IP Address and Subnet Mask of the remote gateway.
The information entered here must match the Local LAN IP and Subnet Mask of the remote
gateway; otherwise the secure tunnel will fail to connect.The IP address range used on the
remote LAN must be different from the IP address range used on the local LAN.
8. Click the VPN Wizard Default Values link at the top right of the screen to view the
recommended VPNC parameters (see Figure 5-4).
9. Click Apply to save your settings. The VPN Policies screen will display showing the policy
“Offsite” as enabled. Click Edit in the Action column adjacent to the policy to confirm your
policy settings.
Figure 5-4