Filter
Top Products
ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-21
v1.0, August 2006
5. Check either the WAN1 or WAN 2 radio box to select the WAN interface tunnel.
6. Enter he remote WAN’s IP Address or Internet Name and then enter the local WAN’s IP
Address or Internet Name. In this example, we are using their FQDNs. (Both the local and
remote addresses must be of the same type—either both must be FQDN or both must be an IP
address.)
7. Click Apply to create the “home” VPN Client. The VPN Policies screen will display showing
the VPN Client policy as enabled.
8. Click the IKE Policies tab to display the IKE Policies table and click Edit adjacent to the
“home” policy to view the “home” policy details.
You can also augment user authentication security by enabling the XAUTH server by selecting
the Edge Device radio box and then adding users to the User Database (see “Extended
Authentication (XAUTH) Configuration” on page 5-31 and “User Database Configuration” on
page 5-34, respectively). Alternatively, you can also choose to selection either a RADIUS-
CHAP or RADIUS-PAP server.
Figure 5-15