Filter
Top Products
Chapter 10. ACLs | 139
ProSafe M4100 and M7100 Managed Switches
2. Define the second rule for ACL 101 to set conditions for UDP traffic similar to those for TCP
traffic.
(Netgear Switch) (Config)#access-list 101 permit udp 192.168.77.0 0.0.0.255
192.178.77.0 0.0.0.255
3. Apply the rule to inbound traffic on port 1/0/2. Only traffic matching the criteria will be
accepted.
(Netgear Switch) (Config)#interface 1/0/2
(Netgear Switch) (Interface 1/0/2)#ip access-group 101 in
(Netgear Switch) (Interface 1/0/2)#exit
(Netgear Switch) (Config)#exit
Web Interface: Set Up an IP ACL with Two Rules
1. Create IP ACL 101 on the switch.
a. Select Security >
ACL > IP ACL.
A screen similar to the following displays.
b. In the IP ACL ID field, enter 101.
c. Click Add to create
ACL 101.
2. Create a new rule associated with
ACL 101.
a. Select Security >
ACL > IP ACL > IP Extended Rules.