Filter
Top Products
Chapter 23. DHCPv6 Server | 395
ProSafe M4100 and M7100 Managed Switches
Note: In this case, you have to configure the command
ipv6 nd other-config-flag on the interface, otherwise, the
host cannot update the DNS with it.
(Netgear Switch) (Config)#interface 2/0/21
(Netgear Switch) (Interface 2/0/21)#routing
(Netgear Switch) (Interface 2/0/21)#ipv6 address 2003:1000::1/64
(Netgear Switch) (Interface 2/0/21)#ipv6 enable
(Netgear Switch) (Interface 2/0/21)#ipv6 nd other-config-flag
(Netgear Switch) (Interface 2/0/21)#ipv6 dhcp server ipv6_server
(Netgear Switch) (Interface 2/0/21)#exit
Web Interface: Configure Stateless DHCPv6 Server
1. Enable ipv6 routing.
a. Select Routing > IPv6 > Basic > Global Configuration.
A screen similar to the following displays:
b. For IPv6 Unicast Routing, select the Enable radio button.
c. Click Apply.
2. Enable ipv6 routing on the interface 2/0/21.
a. Select Routing > IPv6 >
Advanced > Interface Configuration.
A screen similar to the following displays:
b. Under IPv6 Interface Configuration, scroll down and select the Interface 2/0/21
check box.
Now 2/0/21 appears in the Interface field at the top.